- Coreldraw laser cutting setup how to#
- Coreldraw laser cutting setup software#
- Coreldraw laser cutting setup windows#
The laser shows up just like a normal home printer machine. To edit the machine settings, first enter the general print menu. This is a very crucial step! Failure to pay attention to all the settings and you may ruin a perfect piece of material. Once you have gone through and properly formatted all of your vector cuts and rasters, you are ready to set up the appropriate machine settings based on the material that you are using. Any colors will be mapped to a gray scale mode and will etch to depth somewhere in between Black and White. The machine will map Black (RGB = #000) to the deepest part of the etch and it will not etch White (RGB = #FFF). This is how the machine is about to etch a complex graphic into a piece of material. Note about colors and etching - the machine is going to map different colors to different etching depths.
Fill Color = set it to black (RGB = #000). No Stroke = remove the stroke of the object to avoid accidentally cutting it out. In general the following properties can be applied for engraving jobs: This also means there is not a clear path to a “good” engrave, that will determined by you and the job you are trying to do. Raster engraving is a bit more forgiving than vectoring, we have some room for experimenting with different settings. Rastering is when the machine is engraving a graphic into the material, it is a similar process to an inkjet printer except that it removes materials to create the graphic instead of adding layers of ink. Stroke Width = set the stroke width to “hairline”, a dimensionless unit.ĥ. Stroke Color = set the stroke color to black (RGB = #000). No Fill = remove the fill of the object. In order to the machine to cut an object out, we have to set the properties of that object to the following: If we want to cut shapes out of our material, this is the mode we want the laser to be in. Vector cutting is when the machine is tracing the shapes of the vectors cutting through the material. The home position for both is the top-left corner. Likewise, the Y direction is the height of your document and is the direction that the Y Carriage that the laser cutter travels. The orientation of your document and the laser cutter are the same, the X direction is the width of your document and the direction that the X Carriage of the laser cutter travels. If you have set your document to 24” x 12” in size, then you will see a document that represents the entire work area of the laser cutter. Whether you open a preexisting file or create a new one, you will see the document view when you are prepping your design for cutting/engraving. color mode - the laser cutter coverts the color mode into a greyscale mode before engraving and cutting, for the most successful results please always use RGB. d ocument size - our laser cutter has a 24” (width) x 12” (height) working area, please keep all documents sizes to a maximum size of 24” x 12”. useful file name - please include a name that is easily recognizable and a date and/or version number - example of a good file name = “ 10_21_2011_pressfit_birdhouse.cdr ”. There are a couple of important settings that all laser cutter documents should have: If you wish to start from scratch, select “New blank document” and you will be prompted with the new document settings menu. Check out the “Importing Files” section to find out more about file format and compatibility. Select “Open other.” and navigate to your design file to import it. On this screen, you must decide whether you want to create a new document or import a design that you have already prepared. Coreldraw laser cutting setup software#
Our laser cutter computer is located directly to the right of the machine, you will find the software shortcut on the desktop on the computer, double click on it to open. CorelDraw is only a means to job setup and printing, please avoid designing with it. It is recommended that you design outside of CorelDraw and import your design.
Coreldraw laser cutting setup windows#
CorelDraw X5ĬorelDraw is a vector design program that is compatible only on the Windows Operating System. This is the current supported system at the AS220 Labs, use this as a reference if you forget the steps to laser cutting.
Coreldraw laser cutting setup how to#
This guide will introduce you to using CorelDraw with the Epilog Mini 24 Laser Cutter, and teach you how to create a new document or import your pre-existing design and format properly to be sent to the laser cutter.
Back to tutorial index Using CorelDraw with the Laser Cutter I.
0 kommentar(er)
